SARK100 HF ANT Shortwave SWR Antenna Analyzer Meter 1-60Mhz For Ham Radio. This is a SWR analyzer for ham hobbyists. Buttons, "Mode", "Band", "Config", "Scan", "Up", "Down". You can selects operation mode, band and extended functions.
Powered by DC 12 to 14V 500mA external power with 2.1mm power jack, and can be used to m. Easure antenna electrical parameters, SWR, impedance (resistance + reactance), capacitance, inductance. SWR usable measurement range of this analyzer is 1.0 to 9.99. Step size: user configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz.DC 12 to 14V 500mA. Xternal power with 2.1mm power jack(center pin positive). Just connect the power and then work. 5 operation buttons are easy and convenient to operate. Beautiful and simple designed black case would protect the antenna.
Analyzer for ham hobbyist or professionals. Frequency Generation & Control: 1 - 60 Mhz. Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz.Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz. SWR Usable Measurement Range: 1.0 to 9.99. RF Output: Adjustable 2.0 Volts pp (typ). Power Supply: Powered by external 12 to 14V DC, 500mA. Push Buttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down". External Power: 2.1mm Power Jack (center pin positive). Size: 150 x 90 x 40mm / 5.9 x 3.54 x 1.57. Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance. Adjust antenna tuners and determine loss. Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance). Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance. Determine characteristic impedance of transmission line. Measure magnetic loop resonance and SWR. Mode: Selects operation mode, impedance(default), complex impedance, capacitance, and inductance. BAND: Select band from any of the available bands, 160M to 6M. CONFIG: Provides menu for configurations and extended functions, PC Link, step size setting, suspend timeout setting, calibration, and software upgrade. SCAN: Pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna. CAN(up): Increase frequency and used to cancel operation for CONFIG menu. VAL(down): Decrease frequency and used to validate operation for CONFIG menu.
1 x Analyzer(Power supply is not included). Instead of leaving negative/neutral feedback or opening a dispute.
Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails.If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
The item "SARK100 HF ANT Shortwave SWR Antenna Analyzer Meter 1-60Mhz For Ham Radio" is in sale since Thursday, December 27, 2018. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment". The seller is "industry_mall" and is located in Hongkong.
This item can be shipped worldwide.