Ham Radio Antenna

SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio

SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio
SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio
SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio
SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio
SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio

SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio
SARK-100 Mini60 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio. Description: 100% Brand New And High Quality This is a SWR Analyzer for ham hobbists. Frequency Generation & Control: 1 - 60 Mhz Source impedance: 50 Ohms Stability: +/- 100 ppm Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz Usable Measurement Range:SWR: 1.0 to 9.99 Impedance: approx.

5 to 2000 ohms RF Output: Adjustable: 2.0 Volts pp (typ) Power supply: Powerd by External: 12 to 15 Volts DC, 500mA Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down" Switch: "Power On" Connectors: RF Out: BNC USB: Mini-B receptacle External power: 2.1mm Power Jack (center pin positive) Applications: Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance Measure feedpoint impedance Measure ground loss Adjust antenna tuners and determine loss Measure inductors and capacitors Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance) Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance Determine characteristic impedance of transmission line Determine length of? Wave phasing lines Coaxial Cable Loss Determine antenna tuner loss Measure balun loss Measure inductor Q Estimate quartz crystal parameters Measure magnetic loop resonance and SWR Operation button definitions: Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance BAND: select band from any of the available bands: 160M to 6M CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade SCAN: pressing this control initiates a scan of frequencies of the selected BAND.

Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna CAN(up): increase frequency and used to cancel operation for CONFIG menu VAL(down): decrease frequency and used to validate operation for CONFIG menu Package included: 1PCANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists. IMPORTANT NOTE: Custom duty is obligation and liability.

Please check with your country. NO claims will be liable or entertain after this time period. The product must be sent back to us in original condition with no defect (new, unused and unopened) within first 14 days of receiving the product.

No scratches, damages whatsoever & No altering of any part of the item. Original box/documentation/accessories (if any) and packaging. The item "SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio" is in sale since Monday, December 19, 2016. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment".

The seller is "sensesmart" and is located in ShenZhen. This item can be shipped worldwide.

  • Brand: Unbranded
  • MPN: Does not apply
  • Country/Region of Manufacture: China
  • UPC: Does not apply
  • EAN: Does not apply


SARK-100 1-60 Mhz HF ANT SWR Antenna Analyzer Meter SARK100 For Ham Radio