Take a look at the pics... This antenna is up 60 feet. 7-Band: 75/80, 40, 20, 17, 12, 10, & 6 meters 135 feet (45+90) long.Dual core 240/61 balun 1500 watts RTTY 3KW +SSB. CURRENT BALUN with 50 ohm COAX connector. Each balun and antenna is hand crafted, built right here in the USA. The ferrite cores are 2 1/4 in dim. It is encased in 3 inch pvc round tubing. Stainless steel hardware is used. Double aluminum ferrals are used to hold the wire in place on the balun double machine crimped. The wire used is , FLEXI 450 OHM LADDER LINE for the legs with Flex-Weave 14 tuning stubs. Can be used as a off center fed shortwave antenna to provide continuous coverage from 500 kHz to 60 MHz.
Quickly switch bands and eliminate a tuner as one more thing to adjust. The dipole legs are constructed using top quality, Ladder line 2 #16 AWG; 19/29 strands Cu-clad with black poly jacket. 930; Extra flexible & less likely to break in the wind.
Nominal impedance 420(ohms); VP 91.7%. With Flex weave 14 tuning stubs.
FLEX-WEAVE TM is a sophisticated hybrid aerial wire. Its new innovation provides rope lay construction strength and high flexibility. It can be tied in knots to insulators and untied for repeated use. FLEX-WEAVE TM is sometimes referred to as "wire rope" or "jewelers rope".It will not kink or rust out as will copper-clad wire. This flexible wire has also been used for rapid deployment, spool-out, military aerials. FLEX-WEAVE TM #14 (168 strands of #36 wire). It is excellent for quads, dipoles, long wires, and rapid deployment (spooled-out) antennas.
Highly UV resistant PVC jacket. FLEX-WEAVE TM is the "Cadillac of aerial wire". It has been written about in all amateur radio publications since its introduction in 1989. This revolutionary product has been used by thousands of hams, commercial firms, and government agencies.
The insulation has superior abrasion resistance for running through trees and is UV and weather resistant for use on the seacoast or in other harsh environments. They'll stand up to acid rain, high wind loads, and high snow and ice loads. NOTE: Some bands will require the use of a tuner.Do not try to load 80 meters with a outboard tuner on the 160 OCF if the SWR is high it will result in damage to the cores and your equipment. Fully assembled, complete and ready to go with end insulators and crimped center and end connections. Add your 50 Ohm coaxial feed line, suspension rope and go. Can be hung Flat or inverted V configuration.
Remember stay away from power lines. The item "OCF WINDOM DUAL CORE CURRENT BALUN 3KW LADDER LINE" is in sale since Tuesday, August 8, 2017. This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas". The seller is "ni4l_antennas_electronics" and is located in Taylorsville, North Carolina.
This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Dominica, Grenada, Saint kitts and nevis, Bolivia, Ecuador, Guadeloupe, Iceland, Jordan, Luxembourg, Martinique, Nicaragua, Peru, Paraguay, Viet nam, Uruguay, Russian federation, Belize, Turks and caicos islands, Bangladesh, Brunei darussalam, Egypt, French guiana, Guernsey, Gibraltar, Jersey, Cambodia, Liechtenstein, Monaco, Macao, Pakistan, Canada, South africa, Colombia, Antigua and barbuda, Saint lucia, Barbados, Bermuda, Cayman islands, Maldives, Oman, Reunion, Sri lanka, Montserrat.