Frequency Generation & Control: 1 - 60 Mhz. Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz. Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz.
Usable Measurement Range:SWR: 1.0 to 9.99. RF Output: Adjustable: 2.0 Volts pp (typ). Power supply: Powerd by External: 12 to 15 Volts DC, 500mA. Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down". External power: 2.1mm Power Jack (center pin positive).Measure antenna electrical parameters: SWR, impedance resistance +. Adjust antenna tuners and determine loss. Measure coax transmission line SWR, length, velocity factor, approximate Q. And loss, resonant frequency, and impedance. Measure and determine optimum settings for tuning stubs: SWR, approximate.
Q, resonant frequency, bandwidth, impedance. Determine characteristic impedance of transmission line.
Measure magnetic loop resonance and SWR. Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance.BAND: select band from any of the available bands: 160M to 6M. CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade. SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna. CAN(up): increase frequency and used to cancel operation for CONFIG menu.
VAL(down): decrease frequency and used to validate operation for CONFIG menu. The item "1PCS SWR Analyzer & Assembled ready for use ANTENNA HAM RADIO HOBBIST" is in sale since Wednesday, February 26, 2014. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment". The seller is "power116" and is located in ShenZhen ,Guangdong. This item can be shipped worldwide.