Frequency range 144 to 148 Mhz. Have a female SO239 to connect your 50 Ohms coaxial line... Also type "N" connectors are available upon request. To assemble simply insert the director element in to the boom align the hole in the center of the element with the hole in the center of the boom secure with screw, pressure washer and nut.
Repeat above procedure with the reflector element. To assemble the driven elements you need to insert elements in to the boom and align the threaded hole in the element with the hole in the boom secure elements with screws and pressure washer. Mounting hardware is included to support the antenna to the mast... You can mount this antenna either with a vertical or horizontal polarization. If mounted vertically make sure the driven element connected to the center of coaxial line is pointed to the sky.
For more details see pictures. Boom is constructed of 1/2 inch pvc schedule 40 pipe with a center core of 5/8 oak wooden dowel.... Elements are made of 1/2 copper pipe.
This is a version of the popular "tape measure antenna" but this one is specially constructed to be use as a fix or base station antenna. All my antennas are hand made one by one using only good quality materials and adjusted to the better performance under my conditions. If you have any questions or comments please feel free to ask.
The item "3 ELEMENTS YAGI ANTENNA FOR THE 2 METER BAND" is in sale since Friday, September 25, 2020. This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas". The seller is "antennasbykm4hlfllc" and is located in Miami, Florida. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, South africa, New Zealand, Egypt, Reunion.