Ham Radio Antenna

ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists New

ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists New
ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists New
ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists New

ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists New
ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists New. ANT SWR Antenna Analyzer For Ham Radio Hobbists. This is a SWR Analyzer for ham hobbists.

Frequency Generation & Control: 1 - 60 Mhz Source impedance: 50 Ohms Stability: +/- 100 ppm Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz Usable Measurement Range:SWR: 1.0 to 9.99 Impedance: approx. 5 to 2000 ohms RF Output: Adjustable: 2.0 Volts pp (typ) Power supply: Powerd by External: 12 to 15 Volts DC, 500mA Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down" Switch: "Power On" Connectors: RF Out: BNC USB: Mini-B receptacle External power: 2.1mm Power Jack (center pin positive) Applications: Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance Measure feedpoint impedance Measure ground loss Adjust antenna tuners and determine loss Measure inductors and capacitors Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance) Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance Determine characteristic impedance of transmission line Determine length of? Wave phasing lines Coaxial Cable Loss Determine antenna tuner loss Measure balun loss Measure inductor Q Estimate quartz crystal parameters Measure magnetic loop resonance and SWR Operation button definitions: Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance BAND: select band from any of the available bands: 160M to 6M CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna CAN(up): increase frequency and used to cancel operation for CONFIG menu VAL(down): decrease frequency and used to validate operation for CONFIG menu.

Package SWR Analyzer (Batteries/power adapter not included). There is no further discount. Here is the estimated time for your reference only. If you are considering giving a neutral or negative or a low DSR(4 star or below), do write to us and give us an opportunity to address your concerns first.

We are always stand-by to help for any questions or concerns. The item "ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists New" is in sale since Saturday, May 02, 2015. This item is in the category "Consumer Electronics\Radio Communication\Parts & Accessories\Meters". The seller is "diyelecmall108" and is located in Shen zhen . This item can be shipped worldwide.
  • Type: Power/SWR Meter
  • Model: sark100
  • Country of Manufacture: China
  • MPN: Does not apply
  • Brand: Unbranded/Generic

ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists New