Dipole antenna BALUN 11 BL-1030T-2K for Yagi and dipole antennas

BL-1030T-2K BALUN 1:1 (50:50 Ohms). This Current type BALUN is the perfect replacement for your Yagi antennas with a boom of 2 (51mm) diameter.

It covers 10-30MHz and will be perfect for any multi-band antenna such as Cushcraft A3S, A3W A4S with add-on kits, Hy-gain TH3, TH5, TH6DXX, TH7, and TH11 or any WARC multi/single band antenna. Unlike other companies, we do not claim unrealistic impedance values or frequency coverage.

Most important, the value of Common Mode Choking Impedance and its Resistive (Rs) part is always higher than Reactive part (Xs) over the working bandwidth. This parameter, Rs>Xs ensures that your antenna will be balanced and your coaxial cable will not become part of the radiator and destroy radiation pattern and front to back (rear) ratio.

To further improve your antenna system, add complementary CMC-730-5K on the other side of your feed line to reduce induced common mode currents and suppress noise from various sources. Bifilar pair wound of AWG#14 Polyimide Coated Magnet Wire on 2 large 2.4 (61mm) Ferrite cores for maximum Choking Impedance and bandwidth. SO-239 PTFE (Teflon) connector and stainless steel hardware and connecting studs.

Enclosure with mounting bracket for easy installation on 2(51mm) boom antennas. The enclosure has been tested for UV (Ultra Violet) exposure for past eight years with no impact on the material. The item "Dipole antenna BALUN 11 BL-1030T-2K for Yagi and dipole antennas" is in sale since Tuesday, February 7, 2017. This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas". The seller is "myantennas" and is located in Tampa, Florida.

This item can be shipped worldwide.

Frequency Band(s): HF
Model: BL-1030T-2K
To Fit: Base Station Radio
MPN: BL-1030T-2K
Country/Region of Manufacture: United States
Brand: MyAntennas