On offer is a is a quality Australian Made 3 Band base station End Fed Dipole HF Antenna. Designed and manufactured in Oz as a retirement project by HF Antenna guru Graham Robinson (Bushcomm fame).
Super easy to install, the radiating elements are made from 1.6mm diameter stainless steel wire. Specs: 250W PEP, 12M in length, termination is SO239. Generally, you will be able to get away without an inline coupler, but as with all end fed dipole designs, there may be a few bumps in the VSWR response on some bands. Bottom line is, that if you are super fussy about a Uber flat VSWR, then we recommend an inline coupler.