LDG Electronics AT-7000 Ham Radio Automatic Antenna Tuner Never Used

Intended to use it with my IC-7000, but never had the chance. Here are the details: The LDG AT-7000 is the ideal tuner for your IC-7000.

First, it matches up to 10:1 SWR (3:1 on 6 meters), so just about anything you can feed with coax is good to go. And, it has 2,000 memories, enough for every DXpedition, RTTY spot and radio buddy you've got, and then some. Just hit the tune button on the radio, and your AT-7000 will set tuner parameters in less than a second if you've been there before. If not, it kicks off a full tuning cycle that will be over in about 3 seconds. Don't need the tuner just now?

Then just tap the Tune button briefly, and the tuner goes into bypass. Press it again to bring the tuner back on line -- it's just that simple. The AT-7000 is just 6.5L x 6.5W x 1.25H inches and weighs 1.5 pounds, and gets its DC power directly from the radio. No separate power supply needed. The rear panel features SO-239 input and output.

The AT-7000 works with any Icom radio that supports AH-3 or AH-4 Icom antennas. This currently includes the IC-7000, IC-706MkIIG, IC-703Plus, IC-718, IC-746 and IC-756ProIII.

The AT-7000 package includes a 14 inch radio interface cable and a 14 inch coax jumper; you're ready to operate right out of the box.

---