Micro PA100+ Plus Upgraded Version 3.5MHz-30MHz 100W HF QRP Shortwave Radio
HamGeek Micro PA100+ Plus Upgraded Version 3.5MHz-30MHz 100W HF QRP Shortwave Radio Amateur Power Amplifier Improvements: - New: ALC output (0 -4V, compatible with ICOM and YAESU). Optimization: Reduce the noise of the cooling fan. Optimization: Common mode interference suppression capability. Optimization: Stability of ultra narrowband antennas.
Optimization: Consistent power across all frequency bands. Optimization: Full frequency input standing wave ratio.Optimization: Full frequency harmonic suppression. Optimization: Load capacity of power supply circuit.
Replacement: A larger 1.54-inch OLED display screen. Description: - HamGeek PA100+ Plus 100W power intelligent portable/base shortwave frequency band power amplifier. High speed automatic transmission and reception switching, with RF triggering, can automatically switch transmission and reception states even without PTT SEND.
High speed automatic switching of LPF filter, no need to connect ACC control line, can automatically switch the corresponding LPF, 5 sets of 5th order LPF cover all HAM dedicated short wave communication frequency ranges from 80 meters to 10 meters. Power and standing wave display and protection ensure reliable equipment safety under poor antenna conditions and are not easily damaged.
Wide voltage range, voltage display and protection, more convenient for outdoor use of lithium battery power supply. Temperature display, temperature protection, intelligent dual fan cooling. Semi-insert mode function, which can have semi-insert function even without connecting PTT SEND. Supports for ICOM, YAESU, and XIEGU band switching protocols (requires ACC control cable connection). Specification: - Frequency range: 3.5MHz - 30MHz - Input power:? 8W (MAX 10W) - Output power: 100W±1.5dB at 13.8V (note: input power determines output power) - Output impedance: 50 ohm - Supply voltage: 10V-15V; 13.8V (typical value) (note: lower voltage will provide lower power output) - Current consumption:?55â - Dimensions: 125 x 51 x 180 (excluding protrusions); 132 x 58 x 198 (including protrusions) - Weight: about 1.15kg Package Included: - 1 x Power Amplifier - 1 x Power Cable Note: - The battery is not included. Usually it costs about 30USD-50USD. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.