Ham Radio Antenna

N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale

N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale
N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale
N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale
N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale
N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale
N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale
N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale
N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale

N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale

N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale. English version N2061SA Short Wave Antenna Analyzer Frequency range. Power ON/OFF with Press key 2 & 4. This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration.

The default boot into single-point measurement interface. Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration.

Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot. Hold down the CTRL key off press the power switch button. The boot state, long press (2S above) the switch button, after the release, the instrument will shut down.

1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes. 2, try to use good quality RF cable and connectors. 3, calibrated cable marked to the next may not need to calibrate and direct use. 4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable. 5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements. 6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis. 1x N2061 HF Vector Antenna Analyzer 1x User Manual 1x USB charger cable.

Please make sure it is correct. We believe our items are so outstanding. All products are quality checked.

We will be happy to resolve any issues you may have in a cordial and friendly manner. We appreciate your Postive Feedback, and will do the same in return. The item "N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale" is in sale since Friday, January 11, 2019.

This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas". The seller is "leeshop2016" and is located in ShenZhen ,Guangdong. This item can be shipped worldwide.

  • Brand: Unbranded/Generic
  • MPN: Does not apply
  • UPC: Does not apply
  • EAN: Does not apply


N2061SA Antenna Analyzer 1.1MHz1300MHz resistance/impedance/SWR/s11 factorysale