Ham Radio Antenna

OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna

OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna
OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna
OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna
OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna
OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna
OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna

OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna

7-Band: 75/80, 40, 20, 17, 12, 10, & 6 meters. Dual core 240/61 balun 1500 watts RTTY 3KW ICAS.

Each balun and antenna is hand crafted, built right here in the USA u. The ferrite cores are 2 1/4 in diam. It is encased in 3 inch pvc round tubing. Stainless steel hardware is used.

Double aluminum ferrals are used to hold the wire in place on the balun double machine crimped. The wire used is Flex-Weave 14.

Can be used as a off center fed shortwave antenna to provide continuous coverage from 500 kHz to 60 MHz. Quickly switch bands and eliminate a tuner as one more thing to adjust. Due to the fact that one wire leg of the antenna is shorter than the other, the OCF is more convenient to erect than a regular center fed dipole. Check the SWR always BEFORE using with any antenna tuner. The dipole is constructed using top quality, FLEX-WEAVE TM is a sophisticated hybrid aerial wire.

Its new innovation provides rope lay construction strength and high flexibility. It can be tied in knots to insulators and untied for repeated use. FLEX-WEAVE TM is sometimes referred to as "wire rope" or "jewelers rope". It will not kink or rust out as will copper-clad wire. This flexible wire has also been used for rapid deployment, spool-out, military aerials.

FLEX-WEAVE TM #14 (168 strands of #36 wire). It is excellent for quads, dipoles, long wires, and rapid deployment (spooled-out) antennas. Highly UV resistant PVC jacket.

FLEX-WEAVE TM is the "Cadillac of aerial wire". It has been written about in all amateur radio publications since its introduction in 1989.

This revolutionary product has been used by thousands of hams, commercial firms, and government agencies. The insulation has superior abrasion resistance for running through trees and is UV and weather resistant for use on the seacoast or in other harsh environments. They'll stand up to acid rain, high wind loads, and high snow and ice loads. No trimming - fully assembled, complete and ready to go with end insulators and crimped center and end connections. Add your 50 Ohm coaxial feed line, suspension rope and go.

Can be hung Flat or inverted V configuration. Remember stay away from power lines. The item "OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna" is in sale since Wednesday, May 17, 2017. This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas". The seller is "ni4l_antennas_electronics" and is located in Taylorsville, North Carolina.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.

  • To Fit: Base Station Radio
  • Brand: Ni4L Antennas & Electronics
  • Model: Ni4L OCF Windom
  • MPN: Ni4L OCF 7 3KW
  • Frequency Band(s): HF
  • Directivity: Omni-Directional
  • Country/Region of Manufacture: United States


OCF 7 Windom Dual core 3KW Flex Weave Dipole Antenna