OPEN BOX EASY UP EZ TM-30U-95 TELESCOPING MAST. This is a customer return. Blemishes from an attempted install. Tubing has scratches and blemishes from sections being telescoped out and fastened down. Genuine Easy Up Product - Made in the USA.
Perfect for mounting antennas for TV, Ham Radio, WIFI, Scanner, etc. Use in guyed or bracketed installations. 3 Sections of heavy duty galvanized tubing. Features a heavy duty thumbscrew/collar system for setting height. Bottom Section: 1-3/4" OD (18 AWG) Middle Section: 1-1/2" OD (18 AWG) Top Section: 1-1/4 OD (16 AWG).
Masting is overlapped for added strength and stability. NOTE: GUYS, GUY HARDWARE, ANCHORS, AND MOUNT ARE NOT INCLUDED.
EASY UP PRODUCTS ARE PROUDLY MADE IN THE USA. Contact with a power line can KILL you. Choose a safe installation site. Mast must be guyed approximately every 9' at the top of each piece of tubing with the distance from the base of the mast to the anchor equal to the height of the mast attachment point.
Anchors should be spaced every 120" if three guy directions are used, or every 90" if four guy directions are used. The base and all anchors must be properly grounded. Antenna load should not exceed 2 sq ft of surface area. Do not attempt installation or dismantling if there is any wind or on a wet day. Tie off mast with rope (non metal) to deflect away from power line if it should fall during installation or dismantling.
Use adequate and skilled help in working with this product and have an experience supervisor. If you are in doubt as to the proper use or method of installation or dismantling, contact an experienced installer and your local electrical utility for assistance. This item is in the category "Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Antenna & Dish Mounting Gear". The seller is "antennapartsoutlet1" and is located in this country: US.
This item can be shipped to United States, Canada, China.