A newly-designed, smaller roller inductor allows the AT2K to tune 6 Meters. Newly designed capacitors feature lower minimum capacitance for improved high band performance, while maximum capacitance has been increased to 400pF for better low band performance. Impedance range 20 to 1500 Ohm 160m to 6m (assuming resistive load). Low minimum custom variable capacitors (15pF to 400pF at 4.5 kV).
26 uH 5 kV ceramic body roller inductor with turns counter. Silver plated inductor wheel shaft and contact wheel. Active Peak/Peak Hold Cross-needle metering with backlighting.
Powdercoated front panel and top cover. Power Connector and Power Cable Supplied. Requires 12 VDC 200 mA power supply for metering. Dimensions: 5" H x 14.5" W x 13.5 D.
The AT2K matches dipoles, center fed doublets, Verticals, end-fed wire, delta loops, beams, Windoms, Inverted V's and an. The AT2K features a 6 position antenna selector switch.
Forward power metering is in two ranges, 300 and 3000 watts. A Peak/Peak Hold metering function is also provided.
Standing Wave Ratio measurements are displayed with an illuminated cross-needle meter. SWR is read directly from the meter face where the Forward and Reverse needles cross. 090 thick iridite-treated aluminum metalwork and durable powder coated finish on the front panel and top cover, and you have a tuner that will grace your shack for years to come. The QUALITY of the AT2K is absolutely superb. The fit and finish is absolutely perfect, and it's a testimony to Made in America. Don't we wish everything made here was built this well? Com) made available to YOU. AT2K Antenna tuner from Palstar known for it's solid products, designed and made in the USA giving jobs to Americans. The item "PALSTAR AT2K Antenna Tuner for Ham Radio Best Seller" is in sale since Thursday, March 21, 2019.This item is in the category "Consumer Electronics\Radio Communication\Parts & Accessories\Tuners". The seller is "soundzgud" and is located in Piqua, Ohio.
This item can be shipped worldwide.