Switching QRM Eliminator to bypass mode occurs when RF voltage is applied to the input (radio) works as VOX. How it happens: When a RF voltage hits a diode, the RF voltage is rectified (detected), the positive potential opens the transistor and the relay switches to bypass mode.The input is quite sensitive one watt is enough. Be careful and very careful! The RF signal for transmission through the X-Phase device can ONLY after completing ALL of the above connection and turning on the power on the device, while it should be lit by the corresponding PWR indicator on the front panel of the device. As can be seen from the schematic diagram, the X-Phase device in the transfer mode is formed through a high-frequency channel between the TRX and MAIN connectors. The maximum power of the high-frequency signal transmitted through this channel should not exceed. Do not connect the device to the PA output under any circumstances! QRM Eliminator X Phase US4LG 2 UR6QW - YouTube. The device is fully ready for use and does not require additional settings. Sending parcels within 1-3 days.
Packaging: The product dispatched carefully packed. We use only high quality and new packaging materials. Please read carefully product title, description and include list. Some countries may take longer because of your country custom regulation rules or postal service. USA usually takes 3-4 weeks; Europe 2-3 weeks; Australia 3-4 weeks; Germany 2-3 weeks.
Usually it takes 3-4 weeks. And We don`t control it. The item "QRM Eliminator, X-Phase, Noise Eliminator, 1,8 30 MHz (PTT-VOX)" is in sale since Thursday, August 6, 2020.
This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas". The seller is "igor_us4lg" and is located in Kharkov. This item can be shipped worldwide.