Type 1 (SARK100 Antenna Analysis). This is a SWR Analyzer for ham hobbists. Frequency Generation & Control: 1 - 60 Mhz. Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz. Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz.
Usable Measurement Range:SWR: 1.0 to 9.99. RF Output: Adjustable: 2.0 Volts pp (typ). Power supply: Powerd by External: 12 to 15 Volts DC, 500mA. Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down".
External power: 2.1mm Power Jack (center pin positive). Measure antenna electrical parameters: SWR, impedance resistance +. Adjust antenna tuners and determine loss.
Measure coax transmission line SWR, length, velocity factor, approximate Q. And loss, resonant frequency, and impedance.
Measure and determine optimum settings for tuning stubs: SWR, approximate. Q, resonant frequency, bandwidth, impedance. Determine characteristic impedance of transmission line. Measure magnetic loop resonance and SWR. Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance.
BAND: select band from any of the available bands: 160M to 6M. CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade. SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna. CAN(up): increase frequency and used to cancel operation for CONFIG menu.
VAL(down): decrease frequency and used to validate operation for CONFIG menu. Package Included: 1 x ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbist.
Type 3(MINI60 SARK100 with No bluetooth). Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data. Display 2x16 with optional backlight. Precision DDS signal generator (AD9851) used as signal source.USB port connects to PC for field-upgradeable software and uploading of real-time measurement data. Manual control option displays SWR and complex impedance at selected frequencies. Automatic scanning results displayed as frequencies of lowest SWR and complex impedance. Multi-point calibration for better accuracy. Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance. Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance). Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance. Determine length of ¼ and ½ wave phasing lines.
Specifications: Frequency Generation & Control. SWR: 1.0 to 9.99. Adjustable: 2.0 Volts pp (typ). External: 12 to 14 Volts DC, 500mA. Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down".
Package Included: 1 x Antenna Analyzer (as the picture). Type 4(MR100 Shortwave Antenna Analyzer). Can test a standing wave, resistance, capacitance, etc. Can connect the computer to do the antenna and other graphic analysis.
Size: 90 mm 82 mm 30 mm (super light super mini). 1xMR100 Shortwave Antenna Analyzer Meter Tester For Ham Radio DC 12V Q9 Head. Please Make sure it's 100% right. Please leave note for your special request e. But the items must be back in factory condition.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
This item is in the category "Business & Industrial\Test, Measurement & Inspection\Analyzers & Data Acquisition\Cable & Antenna Analyzers". The seller is "worldchips" and is located in this country: CN. This item can be shipped worldwide.