In the mid-1980s, Brian Austin (ZS6BKW) ran computer analysis to develop an antenna system that would permit a low Standing Wave Ratio (SWR) for the maximum number of HF bands possible without an antenna tuner to interface with, and a 50-Ohm coaxial cable as the main feed line. He identified a range of lengths which, when combined with a matching ladder line length, would provide this characteristic. According to an acknowledged expert in computer antenna design and modeling, L. Cebik: Of all the G5RV antenna system cousins, the ZS6BKW antenna system has come closest to achieving the goal that is part of the G5RV mythology: a multi-band HF antenna consisting of a single wire and simple matching system to cover as many of the amateur HF bands as possible.
Published on May 13, 2012 in Amateur Radio and Radio Antennas. Are you a fan of the G5RV antenna? Then you may be interested in the ZS6BKW antenna.
The ZS6BKW antenna is an optimized variant of the venerable old G5RV. 1946 was designed by Louis Varney (G5RV, SK). The ZS6BKW (early 1980's) was derived from the G5RV by Brian Austin (G0GSF, formerly ZS6BKW). He developed computer programs that were used in conjunction with Smith charts to calculate the optimum dimensions for his variant of the antenna. Read G0GSF's own article.
In summary, the ZS6BKW antenna is an optimized variant of the venerable old G5RV. Unlike the original G5RV, which requires an antenna tuner on all bands, the ZS6BKW / G5RV is capable of operating on 10, 12, 17, 20 & 40m bands, generally without a tuner, and with SWR readings usually at 1.5:1 or less. Using a tuner, 6, 15, 30 & 80m bands are attained with much higher efficiency than the original G5RV. Each Antenna is handmade to order with materials carefully tested & selected by Ni4L for quality & durability. #14 polyethylene black jacketed FLEX-WEAVE.
For permanent connection : (92') FLEX-WEAVE is a sophisticated hybrid aerial wire constructed of 168 strands of #36 wire in a #14 highly UV-resistant PVC jacket. This innovation provides rope lay construction strength and high flexibility. It can be tied in knots to insulators and untied for repeated use.
Flex-Weave is sometimes referred to as "wire rope" or "jewelers rope". It will not kink or rust out as will copper-clad wire. It is excellent for quads, dipoles, long wires, and rapid deployment (spooled-out) antennas. The PVC jacket has superior abrasion resistance for running through trees and is UV and weather resistant for use on the seacoast or in other harsh environments.
It will stand up to acid rain, high wind loads, and high snow and ice loads. FLEXI 420-OHM LADDER LINE #16 AWG : (40') 2 #16 AWG; 19/29 strands Cu-clad with black poly jacket. 930; Extra flexible & less likely to break in the wind. Nominal impedance 420(ohms); VP 91.7%. W2AU LL-TRANSULATOR : is the latest configuration of the very popular W2AU ANsulator. Using the same body design, the traditional eyebolt design on the sides has been replaced with Stainless Steel bolts, washers, and nut assemblies.Like the W2AU ANsulator, it has a built-in lightning arrestor with 600 lbs. Of pull-apart strength, in a weatherized, rugged package. Ladder-Loc Center insulator : The Ladder-Loc is a strain-relief and mounting support for 450-ohm ladder-line. It is UV-stabilized and has a proven field record of durability. The ZS6BKW/ G5RV is completely assembled and ready to hang.
It requires about 92 of space and should be hung around 40 high or higher. It can be hung in a flat top or inverted V configuration. Unlike Windom and OCF Dipoles, the ZS6BKW / G5RV is a very forgiving antenna when it comes to nearby towers, trees, fences and other structures. As with all models of the G5RV antenna, the Optimized version also requires a. Of 50-52 ohm coax to complete the matching network.Without this 70 foot of coax, the antenna will NOT function correctly. The item "ZS6BKW / G5RV Optimized Multi Band HF Dipole Antenna Flex-Weave" is in sale since Wednesday, May 17, 2017.
This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas". The seller is "ni4l_antennas_electronics" and is located in Taylorsville, North Carolina.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.