THIS IS VERSION FOR QO-100: 10 489 MHz TO 432 MHz IF!! 10 GHz LNB with PLL and TCXO.Simply modification of the LNB with PLL and 25 MHz X-tal. With 1 ppm TCXO there is nice 10 GHz RX for tropo and satellite. You only need some receiver - SDR or classic. 1 ppm temperature stability TCXO built in. Voltage supply +12V for V-pol. Variable ATTENUATOR in the bias tee. High voltage / current protection. Voltage supply +12V for V-pol, +17V for H-pol. Bias tee connectors: IN (LNB) = F, OUT = SMA and F. NOTE: TCXO has got 1 ppm temperature stability and 2 ppm production frequency tolerance. It means that all pieces have got some small frequency offset.
Depends on piece it is 0 to about 20 kHz. This is not a problem for SDR RX where you can set it in the software.
For LNB with 432 MHz IF you have to calculate with this offset from TX frequency. Option: RTL-SDR receiver with 1ppm TCXO.
1 ppm TCXO for better stability. SMA - SMA cable included (17 cm). 8 bit, up to 2 MHz of spectrum. Compatible with: HDSDR, SDR console etc.Option: 3D printed POTY dual band antenna adapter. 22 mm Cu tube diameter.
Different 10 GHz and IF FQ. Tropo / EME / QO-100.
The item "10 GHz LNB with TCXO for QO-100,10489 to 432 MHz including bias tee board" is in sale since Saturday, September 14, 2019. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment". The seller is "jan_2zaw" and is located in Zdar nad Sazavou, default. This item can be shipped worldwide.