A perfect fit padded case. A new shoulder bag the case fits into very well. A power cord that has anderson connectors to match the battery. An adapter for the antenna conector. A printed copy of the instructions.
This is very good deal on one of these radios. It is now retired and it will be if its not already impossible to get this radio. By far the most desired QRP Sota radio ever made. I get a radio play with it and then get another.
If you want one of these this is a good deal. Mountain Topper Tri-BanderDeveloped by Steve Weber KD1JV Designs. Manufactured by LNR Precision, Inc. A very small, very efficient three band QRP CW rig. Specifications:Three bands, 40M, 30M, 20MReceiver:MDS: 0.2 uVSmall signal band width 500 HzAudio output limited to 1200 mv p-pHeadphone output, 16 ohms min recommended.
Power requirements: 6 volts minimum, 12 volts maximum. Power jack: 1.7 mm center hole, 4 mm diameter, 10 mm (or longer) length.Receive current: 35 ma, no signal. EndFedz Antenna - Perfect Companion for the "Mountain Topper". LNR Precision is excited to announce a new antenna to our product line! The new EFT-MTR is a 40M/30M/20M tri-band QRP antenna rated up to 25W. The "MTR" name was selected as we developed this antenna to be the perfect companion to the wildly popular Mountain Topper QRP transceiver. The EF-MTR's total length is 65' of 22g polystealth wire and weighs less than 4 OZ! It is built with the same high level of workmanship and quality that you have come to expect with all LNR antennas. We are very proud of a particular innovation on this antenna. This EndFedz is a little different than OUR previous designs in that the user has the option to remove an SMA connector at the end of the 30M resonator to enable just 30M, or keep the SMA installed for 40 and 20M. Because of the broad bandwidth of the antenna, it is unlikely that it will require tuning in the vast majority of deployments. This is particularly true of 30M where the band is very narrow. As our tagline states, They Just Work! Polarity: Depends on mounting configuration Design Z: 50 Ohms V.
0KHz 1.5:1 V. Hardware: Stainless Steel Connector: Silver/Tefon BNC Radiator #22 black poly coated copper clad. Very likely you will be able to operate the EF-MTR on 15M, but this is at the discretion of the user. The item "LNR precision Mountain Topper MTR3B, QRP transceiver with NEW EFT-MTR 40M/30M/20" is in sale since Saturday, May 18, 2019. This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas".
The seller is "32degree" and is located in Puyallup, Washington. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Aruba, Dominica, Grenada, Saint kitts and nevis, Montserrat, Barbados, Bolivia, Guadeloupe, Iceland, Jordan, Luxembourg, Martinique, Nicaragua, Oman, Paraguay, Uruguay, Russian federation.