Charging time: 12 hours (charge rate 0.1C) Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance. Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance). Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance Material: ABS Colour: Black Test frequency: 1-60M Size: 90mm 82mm 30mm Connector: M head Power requirements: within the positive external 12V - Driveable talent works, but can not charge the battery.
3.8V 18V - can drive the talent to work normally, can also be normal for the battery charge. Frequency Generation & Control: 1 - 60 Mhz Source impedance: 50 Ohms Stability: +/- 100 ppm Spectral Purity: Harmonics down Greater than - TBD dB beyond 60 MHz Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz Usable Measurement Range: SWR: 1.0 to 9.99 Impedance: approx. 5 to 2000 ohms RF Output: Adjustable: 2.0 Volts pp (typ) 2. Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down" Switch: "Power On" Connectors: RF Out: BNC USB: Mini-B receptacle External power: 2.1mm Power Jack (center pin positive) 3.
Instrument Capabilities: Measure feedpoint impedance Measure ground loss: Adjust antenna tuners and determine loss Measure inductors and capacitors Determine characteristic impedance of transmission lin. Please contact me before you return it. We will do the best feedback for you too.
The item "MR300 Digital Shortwave Antenna Analyzer Meter Tester 1-60M For Ham Radio A6V2" is in sale since Thursday, May 11, 2017. This item is in the category "Mobile Phones & Communication\Radio Communication Equipment\Ham/Amateur Radio\Ham Radio Amplifiers".
The seller is "2013bestbuybest" and is located in Hong Kong. This item can be shipped worldwide.