MR300 RF SWR Shortwave Antenna Analyzer Meter Tool for Ham Radio Hobbyists V1N5
This is an antenna analyzer for ham radio hobbyists. It can measure 50 ohms source impedance. It is also a meter for measuring SWR, impedance, capacitance... Features: Test the antenna technical parameters. Can test the standing wave, impedance, capacitance and so on. Frequency generation & control: 1-60MHz. External power supply: 2.1mm power jack(center pin positive). 6 operation buttons, easy and convenient to operate. Installed black metal case, just connect the power(not included) and then work.
Step size: user configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz. Support measuring data waveform analysis via connecting computer with USB cable(not included). Instrument Capabilities: Measure antenna electrical parameters: SWR, impedance(resistance+reactance), capacitance, inductance; Measure feed point impedance; Measure ground loss; Adjust antenna tuners and determine loss; Measure inductors and capacitors; Measure coax transmission line(SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance); Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance; Determine characteristic impedance of transmission line; Determine length of ¼ and ½ wave phasing lines; Coaxial Cable Loss; Determine antenna tuner loss; Measure balun loss; Measure inductor Q; Estimate quartz crystal parameters; Specifications: Version Type: Ordinary Version Frequency Generation & Control: 1-60MHz Source Impedance: 50 ohms Stability: (+/-) 100 ppm Spectral Purity: Harmonics Down >- TBD dB beyond 60MHz Step Size: User configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz Usable Measurement Range: SWR: 1.0 to 9.99 Impedance: Approx. 5 to 2000 ohms RF Output: Adjustable: 2.0 Volts pp (typ) RF Out: BNC Power Supply: Internal: 8AAA 1000mAh Ni-MH Cells(NOT Included); External: DC 13.818V, 500mA Power Requests: Internal-positive, External-negative 12V - Can drive the Analyzer to work, but can not charge the battery 13.8V18V - Can drive the Analyzer to work, also able to charge the battery USB Interface: Mini-B Receptacle External Power Interface: 2.1mm Power Jack(center pin positive) Item Size: 100 85 38mm / 3.94 3.35 1.5in Item Weight: 254g / 8.97oz Package Size: 15 14 5cm / 5.9 5.5 1.97in Package Weight: 299g / 10.53oz Note: Power supply is not included in the package.
Package List: E2319-1 1 Antenna Analyzer. The item "MR300 RF SWR Shortwave Antenna Analyzer Meter Tool for Ham Radio Hobbyists V1N5" is in sale since Tuesday, June 6, 2017.This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment". The seller is "tomtop_w" and is located in Shen Zhen.
This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.- Brand: Unbranded/Generic
- RF Out: BNC
- Usable Measurement Range: SWR: 1.0 to 9.99
- USB Interface: Mini-B Receptacle
- ASIN: CWHGVZFIJP
- External Power Supply: DC 13.8~18V
- Frequency Generation & Control: 1-60MHz
- Internal Power Supply: 8*AAA 1000mAh Ni-MH Cells(NOT Included)
- Version Type: Ordinary Version
- MPN: Does not apply