Pneumatic Antenna Launcher HF Dipole Installer HIGH DX Complete Kit Made In USA

High DX Pneumatic Antenna Launcher Cable Installer HF Dipole Air Complete. BRAND NEW WEIGHTS WITH LOOP OF 7# STAINLESS STEEL BRAIDED SHARK WIRE CREATED. I have spare barrels, repair parts and both types of weights available! 73s and please stay safe! If you change your monofilament line out we recommend SURPASS brand PE line as the size equivalent is rated at 100 LBS and its much less expensive than the name brand braided lines.

Winter is here and the leaves are gone which makes it an easy time of year to put up a new wire antenna or 2 or 3! Were all stuck at home due to unfortunate circumstances. Great time to get some new wire up in the. These are really high quality antenna launchers made with the best materials available. We use well casings for our air tanks and the finest PVC bonding adhesives available.

5 extra plain weights available for sale on a separate listing.. 3 extra plain weights with molded in Brass Swivel available for sale on a separate listing.. 5 extra plain weights with molded in 7# SHARK WIRE available for sale on a separate listing.. SHIPS in 2 Separate Boxes Priority fully insured. Proudly Made in the USA by a Licensed Amateur company for fellow Ham's.

Perfect for home, field days, clubs, etc. Pays for itself first time you use it. This launcher will clear the tallest trees short of the Sequoia's. Accurate like a rifle and you'll be amazed when you clear your tallest tree's with ease the first shot.

Fill with your air compressor at home, a 12 volt compressor for field days or just a plain old bicycle hand pump. Forget those frustrating sling shots or bows and arrows! Pick out the branch you want, aim and fire.... Attach pull rope or wire and reel in back over.

Built with the best materials, gauges, valves available. Launcher breaks down to a manageable 30 and assembled length is 56 and weighs just under 5 lbs. Easy to store and transport. 30 PSI launches the 2 oz weight 80+ feet minimum. 40 PSI launches the 2 oz weight 100+ feet minimum.

50 PSI launches the 2 oz weight 120+ feet minimum. All high grade well casing pipe. Maximum Air Pressure: NOT TO EXCEED 50 PSI FOR SAFETY!

THIS IS NOT A TOY AND SHOULD NOT BE USED BY ANYONE OTHER THAN RESPONSIBLE ADULTS FOR THE INTENDED PURPOSE THESE WERE DESIGNED FOR! 30 psi clears any oak or walnut tree where we live easily. Know your target area and keep people, animals, electrical wires and structures clear from launched weights!

DO NOT STORE LAUNCHER FILLED WITH AIR FOR ANY REASON! Complete Kit Ready To Launch Includes. 1 Zebco 404 Heavy Duty Reel pre-spooled with 90yrds.

2 Plain lead weights & 1 weight with molded in Brass Swivel. 2 Heavy Duty 1/2 Zip Ties to attach Reel 1 Needed & 1 Spare. A piece of Velcro is included to prevent the reel from slipping on the reel seat barrel. Attach it to 4 pvc section below valve. See photo that shows how to tie weight to monofilament.

2-3 times through the weight followed with a good "fisherman's knot". This knot will not come undone or break if tied correctly. If you don't use a fisherman's knot... #1 Close valve and fill to 30-40 psi. 50 psi is absolute maximum pressure.

DO NOT EXCEED 50 psi for any reason ever! #2 Securely attach weight to line (see note and photo for correct Fisherman's knot) and load in barrel until seated at valve stop. #3 Push reel button to release monofilament line, aim launcher and release valve. #4 Wait until weight falls to ground.

#5 Carefully lay launcher on ground. #6 Disconnect weight and attach your antenna pull line securely to reel monofilament line.

A little tape over knot prevents any snags or knot from coming apart if not tied well. #8 Disconnect antenna rope, re-attach weight to monofilament line for storage. Do Not store launcher filled with air. #9 Attach your wire to line and pull antenna over tree. Note: Teflon tape is added at factory for any screw together joints like barrel assembly.

Be sure to use Teflon tape on the threads and breakdown will be easy. Never use a wrench or pliers on the barrel or gauge.... ALSO: DO NOT set launcher up on it's end!

We use a rounded cap purposely to discourage standing the launcher up on end. If the launcher falls over you may damage the reel or possibly break the threaded barrel fitting. Carefully lay the launcher down flat when not in use while in the field. We have spare parts available if needed, but with a little care it should last a long long time. Keep weights stored away from children. Weights can be painted a bright color or attach a 12 piece of bright thin ribbon to help locating your weight. Pre plan your job with height, direction, pulleys if wanted, etc. And you'll be DXing in no time. If you have tree's close together you can clear multiple tree's in one shot. Put up 2 dipoles and end up with North/South & East/West! If you have ever tried putting up dipoles using ladders, sling shots, bow's and arrows or settled for a low antenna.... This will be the best radio tool you own after the first time you use it!

Safety warning: DO NOT EXCEED 50 psi FOR ANY REASON! We recycle clean bubble wrap whenever possible to keep this stuff out of landfills, but always use brand new boxes or envelopes for every sale!

The item "Pneumatic Antenna Launcher HF Dipole Installer HIGH DX Complete Kit Made In USA" is in sale since Wednesday, April 28, 2021. This item is in the category "Consumer Electronics\Radio Communication\Antennas\Ham, Amateur Radio Antennas". The seller is "youratticonline" and is located in Camdenton, Missouri. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Compatible Brand: Universal
Non-Domestic Product: No
Custom Bundle: No
Band: HF
MPN: HDX60
Compatible Product: Base Station Radio
Modified Item: No
Number of Outputs: 1
Directivity: Omni-Directional
Brand: High DX Pneumatic's
Type: Antenna
Number of Inputs: 1
Model: AC-140
Frequency Band(s): HF
Features: No
Country/Region of Manufacture: United States