This is an antenna analyzer for ham radio hobbyists. It can measure 50 ohms source impedance. It is also a meter for magnetic loop resonance, standing wave ratio, impedance... Features: Frequency generation & control: 1-60MHz.
External power supply: 2.1mm power jack(center pin positive). 6 operation buttons, easy and convenient to operate. Installed black metal case, just connect the power(not included) and then work. Step size: user configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz. Support measuring data waveform analysis via connecting computer with USB cable(not included).Operation: Manual control option displays SWR and complex impedance at selected frequencies Automatic scanning results displayed as frequencies of lowest SWR and complex impedance Battery operated for field use or use external 13.8V wall adapter Power saving modes Multi-point calibration for better accuracy Instrument Capabilities: Measure antenna electrical parameters: SWR, impedance(resistance+reactance), capacitance, inductance; Measure feed point impedance; Measure ground loss; Adjust antenna tuners and determine loss; Measure inductors and capacitors; Measure coax transmission line(SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance); Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance; Determine characteristic impedance of transmission line; Determine length of ¼ and ½ wave phasing lines; Coaxial Cable Loss; Determine antenna tuner loss; Measure balun loss; Measure inductor Q; Estimate quartz crystal parameters; Measure magnetic loop resonance and SWR; Specifications: Version Type: Ordinary Version Frequency Generation & Control: 1-60MHz Source Impedance: 50 ohms Stability: (+/-) 100 ppm Spectral Purity: Harmonics Down >- TBD dB beyond 60MHz Step Size: User configurable increments of 100Hz, 1KHz, 10KHz, and 100KHz Usable Measurement Range: SWR: 1.0 to 9.99 Impedance: Approx. 5 to 2000 ohms RF Output: Adjustable: 2.0 Volts pp (typ) RF Out: BNC Connectors: RF Power Supply(3.7V Li-on Battery NOT Included): Powered by External: DC 12-14V, 500mA External Power: 2.1mm Power Jack(center pin positive) USB Interface: Mini USB Receptacle Item Size: 10 5.2 2.8cm / 3.94 2.05 1.1in Item Weight: 200g / 7.05oz Package Size: Ordinary Version: 11.5 7 7cm; BT Version: 12 9 7cm Package Weight: 240-252g / 8.47-8.92oz. Note: The item is without the Battery! Package List: E2220-1 1 Antenna Analyzer 2 Adapter.
The item "SARK-100 Mini60 Antenna Measure ANT SWR Antenna Analyzer For Ham Radio U2L6" is in sale since Friday, May 5, 2017. This item is in the category "Consumer Electronics\Radio Communication\Ham, Amateur Radio\Other Ham Radio Equipment". The seller is "domecool" and is located in Shen Zhen.
This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia.