A 4 port antenna splitter/divider for stacking or phasing 4 x. BUILT IN THE UNITED KINGDOM NOT THE FAR EAST. BUILT AND TESTED BEFORE DISPTACH FROM THE UK. Our power divider allows you to stack and phase your antennas'the right way'! Rather than using coax cables of varying impedance and quality, the.Power splitter allows you to use quality, transmission grade 50 Ohm coax cable from your rig right up to the antennas themselves. No'special' lengths of coax need to be cut either, provided the 4 runs of coax from the splitter to the antennas are the same length, you are good to go! Silver Plated N type (female) connectors throughout. Gold plated N type center pins. Mill finished for highest levels of accuracy. Uninterrupted air-spaced dielectric ensuring constant impedance throughout. Continuous with 7/16 connector input available at extrta cost. We are dedicated to ensuring the highest possible quality service to our customers, always going above and beyond! InnovAntennas use the very latest software design tools and optimisation methods (Particle Swarm Optimisation) in order to achieve the very highest possible performance characteristics.
Other companies just don't publish polar plots and with good reason! We are proud at just how good our antennas look and perform and for this reason, azimuth, elevation and SWR plots for each and every antenna are published. We can also accept collection for most items.
And we will be happy to answer any questions you have! The item "420MHz 480Mhz centres 430-440 70cms 4 port splitter 50 Ohm 1/2 wl" is in sale since Monday, June 27, 2016. This item is in the category "Mobile Phones & Communication\Radio Communication Equipment\Antennas\Ham/Amateur Radio Antennas". The seller is "innovantennas" and is located in Canvey Island, Essex. This item can be shipped worldwide.