5.6M/18.4FT GP Telescopic Antenna For Ham Radio Shortwave Antenna Antenna New

5.6M/18.4FT GP Telescopic Antenna For Ham Radio Shortwave Antenna Antenna New. Brand new and high quality. Made of high quality materials. 5.6M/18.4FT for GP telescopic antenna for amateur radio users DIY shortwave antenna antenna. Can be used for DIY shortwave radios and telescopic antenna elements.

It can also be used for DIY positive V antenna, for GP antenna, and antenna. Color:As shown in the picture. Expanded length: 5.6m/18.4ft. Number of sections: 14 sections. Weight: 285 g/0.6 lbs.

Folded length: 50 cm/19.7 inches (including nuts). Connection nut: M10 (external thread).

First part diameter: 16mm/0.6. Distal diameter: 3.6mm/0.1in. Material: 201 reinforced stainless steel.

The 10 bottom sections all use secondary reinforcements to change the stress points and make them stronger and tighter. Of course, it takes a little more effort to fold and extend than an ordinary telescopic antenna. Therefore, upright shaking can be reduced and automatic retraction can be avoided, thus extending its lifting span. When extending, it is recommended to pull out section by section from the top, and when retracting, it is recommended to retract section by section from the bottom.

The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data. Also, the each additional item means.

The the same color and size. Transit time may be a little delayed because of the. If you have any questions.

---