Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz. Usable Measurement Range:SWR: 1.0 to 9.99.
RF Output: Adjustable: 2.0 Volts pp (typ). Power supply: Powerd by External: 12 to 15 Volts DC, 500mA. Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down". External power: 2.1mm Power Jack (center pin positive). Measure antenna electrical parameters: SWR, impedance resistance +.
Adjust antenna tuners and determine loss. Measure coax transmission line SWR, length, velocity factor, approximate Q. And loss, resonant frequency, and impedance. Measure and determine optimum settings for tuning stubs: SWR, approximate. Q, resonant frequency, bandwidth, impedance.
Determine characteristic impedance of transmission line. Measure magnetic loop resonance and SWR. Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance. BAND: select band from any of the available bands: 160M to 6M. CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade.SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna. CAN(up): increase frequency and used to cancel operation for CONFIG menu. VAL(down): decrease frequency and used to validate operation for CONFIG menu.
1ANT SWR Antenna Analyzer Meter.