DMR Hotspot Duplex MMDVM TS1 & TS2 UHF Display WIFI Boomerang HSMINI Made in USA

BOOMERANG MINI DMR DUPLEX HOTSPOT. This unit comes pre-configured with CQRadios' default Boomerang configuration which provides an excellent starting point and minimizes the steps needed to get the unit up and running. Please follow the user manual (see link below) to quickly configure the unit. In short, you will need to input your DMR ID, Call sign and Brandmeister hotspot security code to get up and running.

There is no need to change any other parameters since they are already pre-configured! Frequency range: 144MHz - 148MHz / 420MHz - 475MHz (stay away from the edges by at least 1 MHz). Bands: VHF / UHF (best used on UHF preconfigured frequencies 434/439MHz). Supported systems: DMR, YSF, C4FM, P25, NXDN, DSTAR, M17, POCSAG.

Time slot monitoring: Both T1 and T2. Processor: Raspberry Pi Zero 2W. Software: latest Pistar but can run with WPSD. Power: USB cable provided (short). WiFi capable for wireless connectivity.

1.3 large LCD screen (white on black for better visibility). 2 Antennas (TX/RX) with 2 - 3di gain. Size: About 2.5" x 2.5" x 1. PDF manual and setup instructions. The picture may not be 100% representative of the unit that you will receive since we are continuously making updates and changes to this device. We also have a couple of variations of this product depending on parts availability. Please use the power adapter provided with the unit as it outputs the needed power (5V 2.5 - 3A min).

---