MFJ-1984HP EndFed 1/2 Wave 800W 40M-10M Ham Radio Base Wire Antenna 66 feet

Serving ham radio since 1982. Largest Ham radio Store in NY.

MFJ-1984HP EndFed 1/2 Wave 800W 40M-10M Ham Radio Base Wire Antenna 66 feet. END FED, 1/2 WAVE, 40-10M, 800W, WIRE ANTENNA. End-Fed Horizontal Wire antennas (or EFHWs) cover multiple bands without traps, stubs, or resonators. End-fed wires resonate on their 1/2-wave fundamental frequency plus all odd and even harmonics above. MFJ-1984HP come with 66 feet of wire and cover 10 - 40 meters.

FULL HF Coverage, no tuner needed on most frequencies. No long counterpoise, radials or feedline required. Rugged weather-resistant 50-Ohm matching network. Stainless Hardware, UV resistant materials throughout.

Broad-band matching transformer at feed point lets the entire HF spectrum be yours! SWR is so low you may never need a tuner. Just one high center or end support -- installation is fast for home, road, emergencies. EFHWs install virtually any-where in minutes!

Comes with a rugged insulated-wire radiator that prevents detuning when contacting limbs/branches. "No-snag" end insulator slides over branches and through foliage without hang-ups. Toss your EFHW over a high limb for an inverted-V, raise the far end high for a powerful sloper, or even go vertical with an inverted-L.

Dark jacketed wire is virtually invisible -- Don`t let antenna restrictions keep you off the air! It`s no secret that weather events are getting stronger -- the EFHW makes a great emergency back-up for your regular antenna. Power ratings are in Watts PEP for SSB/CW modes, with 50% or less transmit time (ICAS).

Each network designed and tested to ensure great performance in a wide range of operating conditions. If you have any questions, feel free to. If you want an item faster you have the option to upgrade to any expedited method. Large items may only be able to go VIA UPS. Listing and template services provided by inkFrog.

---