Morse Code CW Trainer Ham radio station Morse + K-4 heavy hand telegraphy Key
Morse Code CW Trainer Ham radio station Morse + K-4 heavy hand telegraphy Key. Description: A increase in the volume adjustment function, into the lower left corner of the potentiometer to adjust the volume , change the previous software to adjust the sound frequency adjustment. B adds features to adjust the project are , 1, Code - enter a short code , long code input function set , 2, Frequency audible audio frequency setting , 3, Soun on / off and mute the sound settings, 4, play automatically send Morse code 5, Speed WPM set 6, play dode send the length code setting 7 , hand telegram WPM display. Operation: A function to enter the setup menu , enter the function setting menu has three kinds of methods , When the power switch machine initialization procedure for inquiring way to display Programing? Press and hold the key more than 5 seconds to force the machine to enter the initialization , other operations above, Fat opcode --.. function to set the machine to enter the menu. Previously, only the operation, due to difficulties for beginners , it increased by more than two methods. B feature set , enter the function setting menu , the program issued 1234567890 inquiring way Morse code and show 1 Code, 2 Frequency, 3 Soun on / off, 4 play, 5 Speed, 6 play dode, 7. You need to set which function key is pressed on , no not operate. 1346 function which time the key is complete , functional 2 Frequency Frequency setting the machine but also a way to send out inquiries to 100HZ 1500HZ audio signal , Need to set the frequency on which key is pressed , the function 5 Speed Automatic transmission speed setting , the machine but also a way to make all kinds of inquiries speed , you need to set the pace on which key is pressed.
C transmitter mute function and hand speed is displayed in addition to the function settings can be set , the hands were opcode. --- Can also access this feature, previously only this function , because there are a beginner operation Therefore, increasing the difficulty setting function menu. D automatic transmission features in addition to the function in the menu settings can be set outside , at boot time initialization, also displayed morse code play?
E machine after initialization LCD display sund.... tips and features you need to mute the set is needed to send opcode. Then you just tap the key into the hand of the machine then you send Morse code Morse code can be practiced. F attention to customers reflect the operation code is difficult to send the right hair , because you do not know the machine's transmission speed , the machine can track your speed transmission , the machine default rate of about 10 WPM, you need to send the beginning several relatively long code as XP machine has a digital so you can recognize letters or numbers issued , and then send you the probability of success on the opcode improved a lot. These are my improvements on the machine's functions, other features remain unchanged.
The Changshu K4 key, its styling products for many years, stainless steel plating craftsmanship excellent, has always been the favorite of the majority of fans. 1x CW Trainer 1 x 6.5-3.5 Adapter 1 x 3.5 Interface headphones 1 x power supply. The item "Morse Code CW Trainer Ham radio station Morse + K-4 heavy hand telegraphy Key" is in sale since Monday, June 5, 2017. This item is in the category "Consumer Electronics\Radio Communication\Antennas\Other Radio Antennas".
The seller is "elecdesign2015" and is located in Guangzhou . This item can be shipped worldwide.
- Model: CW
- Type: Morse
- MPN: Does not apply
- Brand: Unbranded/Generic