SARK100 MINI60 HF ANT SWR Antenna Analyzer Meter 1-60Mhz Tester For Ham Radio

There is no battery in this package. Accurate and self-calibrating reflectometer designed to measure forward and reflected signal and impedance data. Display 2x16 with optional backlight. A precision DDS signal generator (AD9851) is used as the signal source. USB port to connect to PC for field upgrade of software and upload of real-time measurement data.

Manual control option displays SWR and complex impedance at selected frequency. Automatic sweep results displayed as frequency with lowest SWR and complex impedance.

Battery for field use or use an external 13.8V wall adapter. Multi-point calibration for improved accuracy. Measuring antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance. Adjust Antenna Tuner and Determine Loss. Measure coaxial transmission lines (SWR, length, velocity factor, approximate Q and loss, resonant frequency and impedance). Measure and determine optimal settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance. Determining the Characteristic Impedance of a Transmission Line. Determine the length of the 1/4 and 1/2 wave phase lines. Measuring Magnetic Ring Resonance and SWR. Spectral Purity: Harmonic drop >- TBD dB over 60 MHz.

Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz and 100 kHz. Adjustable: 2.0 Volts pp typ. Power supply: 3.7v lithium battery. External: 12 to 14 VDC, 500mA.

Controls: Buttons (5): "Mode", "Bands", "Configuration", "Sweep". External power supply: 2.1mm power jack (center pin positive). 1 x Antenna Analyzer (pictured). Please Make sure it's 100% right. Please leave note for your special request e. (US only need 7-10 days), Please take care it.

But the items must be back in factory condition. If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

---