Ham Radio Antenna

SPINNER 3 1/8 EIA male Bulkhead Mounting to 3 1/8 EIA Male BN 834805C0001

SPINNER 3 1/8 EIA male Bulkhead Mounting to 3 1/8 EIA Male BN 834805C0001
SPINNER 3 1/8 EIA male Bulkhead Mounting to 3 1/8 EIA Male BN 834805C0001
SPINNER 3 1/8 EIA male Bulkhead Mounting to 3 1/8 EIA Male BN 834805C0001
SPINNER 3 1/8 EIA male Bulkhead Mounting to 3 1/8 EIA Male BN 834805C0001
SPINNER 3 1/8 EIA male Bulkhead Mounting to 3 1/8 EIA Male BN 834805C0001

SPINNER 3 1/8 EIA male Bulkhead Mounting to 3 1/8 EIA Male BN 834805C0001
Spinner 3 1/8" EIA male Bulkhead Mounting to 3 1/8" EIA Male Adapter. Interface type: 3 1/8 EIA male 50? Version: with built in coupling element. Mounting type: Port 1: bulkhead mounting. Waveguide size: RL 3 1/8. Frequency range: DC to 800 MHz. Frequency band: Band 4/5, Band 3, Band 1, Band 2. Environmental conditions: for limitations see "Environmental Conditions for Broadcast Products" TD-00060. Fixed adapter with coupling elemen.

SPINNER adapters offer outstanding electrical and mechanical properties. Adapters are used to connect transmission lines with of different interface sizes (so-called inter-type or between-lines adapter) or within one size but different interface genders (so-called within-type or in-line adapter). SPINNER high frequency adapters are optimized for quality and performance and are designed for the lowest possible reflection factors.

The outstanding electrical and mechanical properties, the simple installation and the high reliability make SPINNER high-frequency adapters one of the most efficient and cost-effective transition connectors on the market. Precision adaptors with RF quality grade 0 are available upon request. The SPINNER 3 1/8" EIA male bulkhead mounting to 3 1/8" EIA male adapter ensures optimal performance for signal transmission between transmitter and antenna in broadcast stations. Outstanding RF characteristics, best possible passive intermodulation and VSWR. A 3 1/8" EIA male bulkhead mounting to 3 1/8" EIA male adapter enables you to reliably transmit radio-frequency signals in the frequency range from DC to 800 MHz. The adaptor offers a transition from interface 3 1/8" EIA male to interface 3 1/8" EIA male. The connector has a straight direction.

Bulkhead mounting connectors enable wall mounting e. 1-hole connectors are inserted into an appropriately prepared notch or bore on a housing wall and fastened there, e. Coaxial flange connectors, generally known as? Are connected by a coupling element. The flange connector system complies with international standards EIA STD RS-225, 339 IEC, DIN EN 122150 and MIL-F 24044.

The EIA flange connectors are excellently qualified suited for pressurized systems and for outdoor installations. 3 1/8 EIA connectors are used to link two elements of a rigid or semi-rigid high performance coaxial transmission line for radio frequency signals. Typically, these are operated in systems for very high power transmission (from kW to MW), e. In DAB, DVB or FM broadcast systems or in high-energy applications in research facilities (particle accelerator, plasmatron).

This item is in the category "Mobile Phones & Communication\Radio Communication Equipment\Parts & Accessories\Coax Cables & Connectors". The seller is "csystems123" and is located in this country: GR.

This item can be shipped worldwide.
  • Brand: SPINNER
  • Type: Connector
  • Unit Type: Unit
  • Connector A: Not Specified
  • Country/Region of Manufacture: Germany
  • Unit Quantity: 1

SPINNER 3 1/8 EIA male Bulkhead Mounting to 3 1/8 EIA Male BN 834805C0001