Ultra Low Loss Resonant Cavity RF Filter

Ultra Low Loss Military Grade Helium Hotspot Resonant Cavity RF Filter (US915). McGill Microwave Systems has innovated a new Ultra High performance Resonant Cavity Filter - which is specifically designed for Helium Hotspot/IoT applications. This unique and ultra high performance Military Grade filter design by McGill Microwave is vastly superior to alternative technology SAW (Surface Acoustic Wave) technology filters which typically have large associated Insertion Losses of between 2.2 and 4 dB's-resulting in significantly reduced signals levels in excess of 50% being received by the Hotspot, reduced witnessing/beacons and reduction of HNT generation. The use of this unique Helium Hotspot filter increases the received power levels at the hotspot by up to 50% when compared to SAW Surface Acoustic Wave Filters.

This directly results in a significant increase in the number of witnessed beacons (and therefore HNT Generation) in applications where Helium Hotspot performance is affected by RF noise performance or hotspot designs which have been manufactured with little or no filtering of the received witness signals. This filter must be installed directly connected to the Hotspot Antenna - therefore in all outdoor applications this means this filter will be fully exposed to the outdoor elements.

As such, these Filters are fully IP 67 weather proof sealing rated, a specification commonly used in Military applications. Another unique feature of this design are the connector types-in this case both the connectors are N Type Female & N Type Male. This removes the need to use additional adaptors to connect this filter between existing McGill Antennas an RF Cable assemblies.

---